What is the AHEAD project?
The AHEAD Project, short for Advanced Heat Pump Demonstrator, is a joint initiative between Takeda and the AIT Austrian Institute of Technology. Within this project, SPH, now integrated into Copeland, serves as the manufacturer and supplier of a high-temperature industrial heat pump for steam generation at Takeda's Vienna production site.
Takeda operates in 80 countries worldwide, including Austria, where around 3,000 employees work in research and development, plasma collection, production and patient services. Its Vienna production site focuses on manufacturing plasma-derived medicines used to treat rare and complex diseases. As in nearly every company in the chemical and pharmaceutical sector, energy demand is high, particularly for process heat, steam and cooling.
Chemical intermediates and finished pharmaceuticals must be cooled on one hand, while Takeda’s production processes require heat and steam for biochemical reactions and sterilization on the other. Until recently, Takeda covered heat demand at this site using natural gas, a pattern shared across European pharmaceutical manufacturers. The AHEAD project demonstrates that effective, high-performance alternatives to fossil fuels are already viable both technically and economically.
"We are convinced that a healthy planet is the foundation for healthy lives. Therefore, we have set ambitious environmental targets for more sustainable pharmaceutical production, including achieving net-zero greenhouse gas emissions across our entire value chain by 2040," explains Maria Löflund, Management Board Member of Takeda Austria and Head of the Vienna production sites. "AHEAD is an important step on this path, as this research project demonstrates that we can reduce emissions by 80 percent at one of our sites through innovative technology and natural refrigerants. It will serve as a model for other Takeda locations and as a showcase for the entire pharmaceutical industry and beyond."
How does the Vilter VQ180 generate steam for biopharmaceutical production?
The Vilter VQ180 system, described by Takeda as the core component of the AHEAD project, upgrades existing waste heat into process steam suited for biopharmaceutical production. The goal was to replace fossil fuels such as natural gas in process heat generation, significantly reduce CO₂ emissions and lower the carbon footprint at the Vienna site by up to 80%.
Conditions at Takeda already supported this transition: a CO₂-free energy center for centralized cooling was already in operation in Vienna. The facility runs on 100% natural refrigerants, and waste heat from the cooling process provides an ideal basis for heat recovery. A pre-existing heat pump further raises this waste heat to 65 to 70 °C, supplying hot water for space heating at the site.
The VQ180 builds on this foundation. It uses the existing hot water as a heat source and upgrades it in a crucial step: the high temperature heat pump utilizes the hote water to produce steam at approximately 115°C. A subsequent steam compressor increases the steam pressure to 11 bar(a), achieving a saturation temperature of 184°C, a level typically required in biopharmaceutical production. The compressor can further raise this to 200°C, generating either saturated or superheated steam. Without further development, the system can be scaled to deliver temperatures between 200 and 260°C.
The plant produces around 2.5 tons of hot steam per hour, equivalent to a thermal output of 1.7 MW. This allows Takeda to reduce CO₂ emissions at this Vienna site by up to 80% and enables almost CO₂ -free steam generation for approximately seven months of the year. In total, the system saves up to 1,600 tons of CO₂ annually. The VQ180 at Takeda uses the natural refrigerants butane and water, with global warming potentials (GWP) of 0.006 for butane and 0 for water, making them extremely climate-friendly. They are also PFAS-free, supporting a particularly sustainable and future-proof solution. The refrigerants used in Takeda’s existing cooling system likewise carry a GWP of 0.
What are the project and system details for the VQ180 at Takeda Vienna
- Commissioning: 09/2025
- Heat source: Hot water from waste heat recovery of the centralized cooling plant
- Heat source temperature: 70°C (supply) / 65°C (return)
- Heat sink medium: Steam
- Heat sink temperature: 90/115°C at 1.67 bar(a) | 184°C at 11 bar(a)
- Refrigerant: Butane
- Electrical input power: 300 kW | 372 kW
- Heating capacity: 1,270 kW | 1,561 kW
- COP: 4.3 | 2.3
- Projected CO₂ savings: 1,600 t CO₂/year
How will the VQ180 drive decarbonization across other industrial sectors?
The AHEAD research project, jointly implemented by Takeda and the AIT, was funded under the NEFI – New Energy for Industry initiative by the Austrian Climate and Energy Fund, supported by the Federal Ministry for Innovation, Mobility and Infrastructure. The project includes developing a concept for implementing the VQ180 system at additional Takeda sites in Austria and worldwide, as well as in other industrial sectors. The VQ180 demonstrates the decarbonization potential of Vilter’s heat pump technology for industries with high process heat and steam demand — including the paper, chemical and food industries.
The AHEAD project received the Net-Zero Industries Award 2023 from the global Mission Innovation, Net-Zero Industries initiative, which honors solutions that accelerate the deployment of industrial decarbonization technologies. Selected from nearly 70 entries by an independent international expert jury, AHEAD won the national award in the category Outstanding Projects. The project was also presented at the UN Climate Change Conference (COP28) and was featured in the Austrian Pavilion at Expo 2025 in Osaka, Japan.
SPH, now part of Copeland, contributes as a technology developer, supplier and consortium partner, helping drive the transformation toward climate-neutral and economically sustainable process heat supply.
FAQs
What temperature range can the VQ180 heat pump deliver?
Without further development, the VQ180 system can be scaled to deliver temperatures between 200 and 260 °C, building on its baseline output of saturated or superheated steam at up to 200 °C.
What industries beyond pharmaceuticals could benefit from the VQ180?
The VQ180 demonstrates decarbonization potential for industries with high process heat and steam demand, including the paper, chemical and food industries, alongside additional Takeda sites in Austria and worldwide.
What recognition has the AHEAD project received?
The AHEAD project received the Net-Zero Industries Award 2023 from the Mission Innovation, Net-Zero Industries initiative, was presented at COP28, and is featured in the Austrian Pavilion at Expo 2025 in Osaka, Japan.
Unlocking the potential of VQ180 heat pump technology
Organizations across the paper, chemical, food and pharmaceutical industries interested in unlocking the potential of VQ180 heat pump technology for process heat and steam generation are invited to get in touch for a consultation.
[Kontaktdaten Christoph Rau/Frank vom Hofe]
