
Right-size dimensioning: demand-orientated design of high-temperature heat pumps
Right-size dimensioning matches high-temperature heat pump capacity to actual process heat demand instead of oversizing for worst-case scenarios. This approach cuts energy waste and lowers both system and operating costs.
Decarbonizing industry through cost-optimized process heat?
Continuous demand for process heat and steam, combined with high energy prices and decarbonization targets, is pushing more companies to rethink how heat is generated and used. The Right-Rize-Approach offers a path to demand-oriented, cost-optimized and energy-efficient use of process heat while advancing decarbonization.
What is optimum sizing for industrial heat pumps?
Optimum sizing means dimensioning heat pumps so they meet demand at all times without being oversized. Manufacturers of industrial heat pumps have focused on this challenge for some time, since oversizing drives up system and energy costs and reduces the climate benefits heat pumps can deliver. Thinking big is easy. The real art is matching capacity precisely to demand.
How has the traditional design of process heating systems worked?
Traditional boiler design for process steam and hot water has focused on the highest temperatures required anywhere in an industrial process, resulting in systems that are often oversized. Many industrial processes still generate steam using fossil fuels, and the traditional technical approach follows four steps:
- Identify the heat sink in the system or plant that places the highest demands on temperature and pressure
- Sum all maximum thermal loads across the entire system
- Design a heating system that delivers the total heat output plus safety margins, sized to meet the most demanding heat sink over the long term
- Adjust temperature and pressure downward, often using valves, in parts of the system with lower demands, which wastes unused energy in the process
This approach has proven reliable and effective for decades. Effective, but not efficient: the built-in flexibility and uncertainty around process requirements created an immense waste of energy.
Consider a household that brews several cups of tea daily at 80°C but heats water to 100°C in a kettle before letting it to cool. Now scale that kettle to 50,000 liters, boiling continuously seven days a week, even though water at 100°C is needed only in exceptional cases and 80°C is almost always sufficient. This scenario is energy inefficient and not economically feasible, illustrating the same waste that oversized process heating systems create at industrial scale.

How does the Right-Size Approach work for high-temperature heat pumps?
The Right-Size Approach reverses the traditional method: industrial heat pumps are designed to meet the base demand of a plant, with heat generation adapted to the higher temperature requirements of individual processes. The approach follows four steps:
- Identify a suitable heat level, meaning the required output at different temperature levels, and select levels based on criteria such as output or existing waste heat potential.
- Identify the higher temperature required by individual processes within the plant or factory.
- Select appropriate technologies for higher steam or water temperatures, such as booster industrial heat pumps, gas-fired or electric boilers or mechanical vapor recompression (MVR) systems, which raise pressure and temperature as needed while remaining smaller than classically designed equipment.
- Design the heat pump according to existing waste heat potentials and the required base load, continuously meeting the base demand of the system. Supporting technologies can be adapted to higher temperatures or pressures for individual production steps, so no unused energy is lost.
This approach reduces the power requirement and energy consumption of the entire system. Heat generators can be designed smaller and do not need to run continuously, which lowers system costs, reduces operating costs and lessens environmental impact. The highest temperature requirements are then met separately, for example, through connected booster heat pumps or electric boilers,while overall operating costs drop significantly.

In most cases, the heat pump should be designed either to optimally utilize existing waste heat or, where waste heat is unlimited, to optimally serve the heat sink. Because the investment in a heat pump amortizes faster with increasing operating time, base load operation is common, with peak load generated by other means. Wheremaximum CO₂ savings is the goal, designing for peak load is advisable instead.
What opportunities does the Right-Size-Approach create for industrial heat pumps?
Global data from the American Council for an Energy-Efficient Economy (ACEEE) shows that total energy consumption for industrial heating systems can drop by 40% to 60% when fossil-fuel based systems are replaced or downsized by optimally dimensioned industrial heat pumps.
The Right-Size-Approach allows steam generation components to expand as required while other system components are downsized and their operating times reduced. Combined with other regenerative heat generators such as electrode steam generators or the use of biomethane and hydrogen, creates demand-based and highly cost-optimized heat and steam generation solutions. It also enables a gradual transition from fossil fuels to decarbonized process heat generation.
High-temperature heat pumps use waste heat at a low temperature level to provide heat at a higher temperature level . In many cases, this enables a shift centralized to modular steam generation systems, supporting better process control through advanced digital technologies. Modularity means parts of the heating system can shut down when not needed, without switching off the entire system. The inherent efficiency of high-temperature heat pumps reduces power supply requirements, electricity consumption and CO₂ emissions in most application scenarios.
This approach often requires a shift in thinking. Demand-based design can raise uncertainties among project managers about system performance and reliability. Consultations with clients and experience realizing such show these concerns are unfounded: process heating systems dimensioned according to the Right-Size-Approach remain powerful, reliable, fail-safe and consistently supply the required process heat in the desired quality.They simply operate more economically and efficiently than oversized systems. The motto for steam and heat generation today isperformance optimization instead of performance maximization.
What opportunities does the Right-Size-Approach create for industrial heat pumps?
Global data from the American Council for an Energy-Efficient Economy (ACEEE) shows that total energy consumption for industrial heating systems can drop by 40% to 60% when fossil-fuel based systems are replaced or downsized by optimally dimensioned industrial heat pumps.
The Right-Size-Approach allows steam generation components to expand as required while other system components are downsized and their operating times reduced. Combined with other regenerative heat generators such as electrode steam generators or the use of biomethane and hydrogen, creates demand-based and highly cost-optimized heat and steam generation solutions. It also enables a gradual transition from fossil fuels to decarbonized process heat generation.
High-temperature heat pumps use waste heat at a low temperature level to provide heat at a higher temperature level . In many cases, this enables a shift centralized to modular steam generation systems, supporting better process control through advanced digital technologies. Modularity means parts of the heating system can shut down when not needed, without switching off the entire system. The inherent efficiency of high-temperature heat pumps reduces power supply requirements, electricity consumption and CO₂ emissions in most application scenarios.
This approach often requires a shift in thinking. Demand-based design can raise uncertainties among project managers about system performance and reliability. Consultations with clients and experience realizing such show these concerns are unfounded: process heating systems dimensioned according to the Right-Size-Approach remain powerful, reliable, fail-safe and consistently supply the required process heat in the desired quality.They simply operate more economically and efficiently than oversized systems. The motto for steam and heat generation today isperformance optimization instead of performance maximization.
Why does demand-led design of high-temperature heat pumps matter?
The Right-Size-Approach to designing high-temperature industrial heat pumps marks a decisive advance in energy-efficient process heat generation. Instead of relying on oversized systems that waste an unnecessary amount of energy and resources, this approach enables demand-based and cost-optimized dimensioning according to the principle: as much as necessary and as little as possible.
Featured quote:
For steam pressure, the rule is: "As high as necessary, as low as possible."
Adapting process heat generation to actual requirements helps companies position for the future, reduce their operating costs considerably and improve their environmental footprint significantly.
The modularity and flexibility of high-temperature heat pumps leads this shift, enabling individual system components to switch on or off as required. This adaptability supports more precise process control, supply-oriented energy utilization and significant energy cost savings. Uncertainties and a need for consultation may still arise when designing according to the Right-Size-Approach, but one thing is clear: the era of oversized process heat systems is over. The path leads toward customized, more efficient solutions that offer optimum performance rather than maximum performance, such as the modular industrial heat pump ThermBooster™ (now Vilter VQ180) to developed by SPH (now integrated into Vilter).
For industry, this approach delivers economic benefits and offers the opportunity to actively contribute to climate protection and the energy transition, positioning companies as sustainable, sustainably economical and sustainably successful.
FAQs
What makes industrial heat pumps "right-sized" rather than oversized?
A right-sized heat pump is designed to continuously meet the base heat demand of a plant, with separate technologies such as booster heat pumps or electric boilers covering higher temperature peaks. This differs from traditional sizing, which builds the entire system around the single most demanding heat sink.
Does the Right-Size-Approach affect system reliability?
No. Experience with client consultations and completed projects shows that systems dimensioned according to the Right-Size-Approach remain powerful, reliable and fail-safe while supplying the required process heat in the desired quality at all times.
What energy savings can right-sized heat pumps deliver?
ACEEE data shows total energy consumption of industrial heating systems can fall 40% to 60% when fossil fuel-based process steam and heat systems are replaced or downsized by optimally dimensioned industrial heat pumps.
We are here to help.
Organizations exploring demand-based design for heat generation systems can request guidance on how the Vilter VQ180 makes systems and processes cost-efficient and sustainable.

