
Industrial heat pumps capture ambient heat or waste heat, upgrade it and deliver it as process heat at higher temperatures for industrial applications. None of this would be possible without refrigerants.
Refrigerant choice is one of the most important factors determining the technical and economic performance of an industrial heat pump. It has a decisive influence on the temperature lifts and heat sink temperatures that can be achieved. At the same time, the specific waste heat source, individual safety requirements and the applicable regulatory framework all determine which refrigerants are viable for a specific application. Particularly in the industrial high-temperature range, no universal solution exists. understanding why requires first understanding how refrigerants work and where they differ.
What role do refrigerants play in industrial heat pumps?
Refrigerants are the working fluid of an industrial heat pump. Their central function is to absorb heat from an available source, raise it to a higher temperature level and deliver it as usable process heat or process steam.
This requires a closed thermodynamic cycle. The liquid refrigerant absorbs heat from a heat source at low temperature, causing it to evaporate. Electrically driven compressors then compress the now gaseous refrigerant, raising it to a higher pressure and therefore a higher temperature level. The refrigerant subsequently transfers its thermal energy to the heat sink, cools down and condenses, and the cycle begins again.
The refrigerant is therefore a central design parameter for industrial applications. It determines which source temperatures can be utilized, which target temperatures are achievable and what temperature lift is technically and economically viable. Refrigerant selection is particularly critical when utilizing waste heat, which is frequently available at comparatively low but sometimes significantly variable temperature ranges of 30 to 80°C, while process heat or steam at temperatures of 120, 160, or 200°C may simultaneously be required. How efficiently the required temperature lift can be achieved depends substantially on the properties of the refrigerant.
Which properties make a refrigerant suitable for industrial use?
No single parameter determines whether a specific refrigerant suits a given industrial heat pump application. Rather, suitability depends on the interplay of several thermodynamic, safety-related and economic factors. Particularly when utilizing industrial waste heat as a source and targeting high process temperatures, a project-specific assessment and design approach becomes essential.
Thermodynamic properties
The critical temperature and critical pressure of a refrigerant rank among the key selection criteria. These values indicate up to which temperature and pressure range a refrigerant can be usefully condensed, and therefore up to which range it can be employed in the heat pump process.
The specific heat capacity and latent heat of a refrigerant determine how much thermal energy can be transported per kilogram of refrigerant. The more favorable these values, the more compact or efficient the system design can be.
Density and thermal conductivity primarily influence the dimensioning of pipework, heat exchangers and compressors within the system. Both values therefore also affect energy consumption and overall system efficiency.
How do efficiency and performance factor into refrigerant selection?
The efficiency and performance of an industrial heat pump depend not only on the thermodynamic properties of the refrigerant. The interaction between heat source, inlet temperature and desired target temperature plays a major role. As a general rule, the greater the required temperature lift between the waste heat source and the target temperature, the higher the demands placed on the refrigerant.
The efficiency and performance of the heat pump are expressed in its coefficient of performance (COP), which is, however, also substantially influenced by the system design. The use of high-performance refrigerants does not automatically translate into high overall efficiency.
What safety factors apply to refrigerant selection?
Safety considerations play an important role in selecting the appropriate refrigerant. The safety classification of a refrigerant under ISO 817/EN 378 provides information on both flammability and toxicity, two fundamental factors in any safety assessment.
Box
Letters describe toxicity:
- A = lower toxicity
- B = higher toxicity
Numbers indicate flammability:
- 1 = non-flammable
- 2L = mildly flammable / low burning velocity
- 2 = flammable
- 3 = highly flammable
End
Using this system, refrigerants can be classified as, for example, A1 (low toxicity, non-flammable) or A3 (low toxicity, highly flammable).
In industrial applications, the safety classification in turn influences certain aspects of system design, including required safety distances, gas detection and ventilation systems, explosion protection and applicable permit requirements. In addition to flammability and toxicity, operating pressure level is also relevant, as high pressures may impose additional requirements on components, pipework and safety devices.
Why do economic viability and availability matter?
Beyond the technical and physical properties, price, availability and security of supply also play an important role in refrigerant selection. Regulatory developments can affect the cost and availability of certain substances.
How does material compatibility affect long-term performance?
Not every refrigerant is equally compatible with the materials, seal types, lubricants or other system components in a given system. The chemical stability and material compatibility of the refrigerant affect the service life of the entire system, and the high-temperature range, with its elevated pressure levels and thermal stresses, proves particularly demanding in this respect.
Natural vs. synthetic and refrigerants: What is the difference?
Selecting the appropriate refrigerant in practice typically relies on a structured comparison of available options with regard to thermodynamic properties, global warming potential (GWP), ozone depletion potential (ODP), safety classifications and regulatory requirements, combined with a consideration of the cost of the refrigerant itself and the resulting implications for system design and capital expenditure.
The parameters below provide an initial orientation. They are not intended to replace, and cannot replace, a detailed, project-specific engineering assessment.
| Refrigerant | Substance class | Safety class (ISO 817) |
|---|---|---|
R290 (Propane) RT | Hydrocarbon | A3 |

