Cost reduction through energy savings and competitive advantage through sustainability are two clear benefits high-temperature industrial heat pumps provide to the process industry.
What are high-temperature industrial heat pumps?
High-temperature industrial heat pumps are an innovative energy efficiency, cost savings and CO2 reduction solution for many industries. Unlike conventional industrial heat pumps, high-temperature heat pumps generate process heat of up to 200°C by efficiently utilizing waste heat from industrial processes and converting it into the heat required in the form of steam or water. This means that the process heat at between 100 and 200°C, required in many industries, can be generated using the same energy-efficient technology used in a residential heat pump. This significantly lowers energy consumption in industry while reducing CO2 emissions.
Reducing energy consumption and CO2 emissions makes environmental and business sense. Companies are no longer subject to fluctuating energy procurement prices, can reduce energy costs and increase competitiveness. High-temperature industrial heat pumps also play an important role in the energy transition and climate protection. By reducing CO2 emissions, they help companies do business sustainably and therefore to achieve climate targets, an aspect stakeholders increasingly focus on. In combination with climate-neutral green electricity, process heat can even be produced carbon-neutrally.
Key benefits include:
- Non-dependence on fossil fuels and fluctuating energy prices
- Reduction in energy consumption
- Support for sustainable business practices
- Future viability given rising carbon taxes
How does a high-temperature industrial heat pumps work?
A high-temperature industrial heat pump uses waste heat energy as a heat source, converts it into the required process heat at high temperatures with the aid of a small quantity of electrical energy and makes it available to industrial production processes.
When "conventional" process heat is generated using fossil fuels, any residual heat is lost or even must be recooled using additional energy input. Low-temperature waste heat from production processes below 100°C usually cannot be put to other uses and is often discharged. This is neither efficient nor environmentally compatible. A heat pump addresses this gap directly.
How a compression heat pump works?
The most common heat pumps are so-called compression heat pumps a tried-and-tested technology used in heating systems or, conversely, in refrigerators for decades. A liquid refrigerant extracts energy from the heat source (the exhaust air or, in a refrigerator, the food) and heats up as a result. Due to its low boiling point, the refrigerant evaporates and is then compressed to a higher pressure in a compressor, where it heats up substantially.
A heat exchanger transfers the resulting high-temperature heat to the application system (steam or hot water), the heat sink. In the process, the refrigerant reliquefies and cools down further. The liquid refrigerant, warm and under high pressure, is then expanded again to low pressure and low temperature. As this is a continuous cycle, the refrigerant can then absorb heat again.
The refrigerants used are environmentally compatible media, such as propane or modern synthetic refrigerants with low-global warming potential (GWP). Refrigerant selection factors include thermal suitability, environmental compatibility, safety, price and efficiency. Best Practices Example: UBQ, Gelatine, Bakery
Where can high-temperature industrial heat pumps be used?
High-temperature industrial heat pumps can be applied wherever process heat is required, food production to chemical and pharmaceutical distillation to drying processes in paper manufacturing.
To date, industrial heat pumps have been limited to temperatures up to about 100°C and are therefore unusable in many industrial processes. SPH (now part of Copeland) developed a solution that incorporates innovative compressor technology and modular heat pump design, combined with special refrigerants, for a wide range of application scenarios. With the aid of innovative reciprocating compressor technology, these heat pumps can now generate temperatures of up to 200°C, making them attractive to companies that require high temperatures for their processes.
Key points:
-
Wide range of applications in the food, chemical, pharmaceutical or paper industries
-
High temperatures achieved with the aid of innovative reciprocating compressor technology
-
Suitable even when temperatures of up to 200°C are required
What are the advantages of high-temperature industrial heat pumps?
High-temperature industrial consume up to 70% less energy compared to conventional heating systems that run on fossil fuels, making efficiency one of their biggest advantages.
A high-temperature industrial heat pump can be used flexibly for various applications that require process heat, in principle wherever process heat up to a maximum of 200°C is required.
Another advantage is environmental friendliness: the high-temperature industrial heat pump uses waste heat from proprietary industrial processes, reducing CO2 emissions. The only energy source a heat pump needs is a small quantity of electricity for its drive mechanism and some auxiliary equipment. This means that if a company purchases electricity from renewable sources, it can even reduce the CO2 emissions of its manufacturing plant to zero. This reduces dependency on gas as a resource and enables future savings given rising carbon taxes, which are expected to double by 2026.
At a glance: the advantages of the ThermBoosterTM
Which industries use high-temperature industrial heat pumps?
High-temperature industrial heat pumps are already used successfully in the food processing, chemical manufacturing and paperindustries, each characterized by high heat requirements during individual process stages combined with high levels of waste heat.
Food processing industry:
- Heating and pasteurization of foods such as milk, juices and sauces
- Drying and dehydration of foods, such as fruit, vegetables, cereals and meat
- Cooking, baking, and other thermal processes involved in food production
Chemical manufacturing industry:
- Chemical reactions in processes such as polymerization, distillation and catalytic reactions
- Drying and vaporization to remove moisture from chemical solutions, suspensions and slurries
Paper industry:
- Drying processes along the entire production chain
Best Practices Examples
What are the prerequisites and parameters for implementation?
A specially developed high-temperature reciprocating compressor, combined with the appropriate process technology, a heat pump such as the VQ180 to generate output temperatures of up to 200°C.
In the past, the range of applications for industrial heat pumps was limited. They could only generate output temperatures of less than 100°C, while the bulk of process heat demand requires temperatures between 100°C and 200°C. The VQ180’s multistage, modular design enables it to handle large temperature increases and raise output temperatures to the required levels. This innovative technology is suitable not only for new manufacturing plants but can also be retrofitted in existing plants.
V180 Data Sheet
Heat pump technology, including the larger capacities used in commerce and industry, plays an increasingly important climate protection role. VDI Guideline 4646 "Application of Large-Scale Heat Pumps", scheduled for release in the beginning of 2024, demonstrates that both users and policymakers increasingly recognize the relevance of this topic. The guideline will define the planning process for integrating heat pumps in production plants, among other things, and develop a methodology for recording parameters and selecting the appropriate heat pump system.
Link
What do high-temperature industrial heat pump cost?
Investment costs for industrial heat pumps are higher than for conventional heating systems, though government funding opportunities exist, such as the BAFA/KfW "Energy and Resource Efficiency in Industry" funding program.
The payback period depends on various factors, such as the type of heat pump, its application and trends in energy source costs and CO2 emissions, so it cannot be estimated across the board. In principle, the more the costs for energy and CO2 emissions increase, the faster the initial investment is amortized. If designed appropriately, the additional operating costs for a heat pump are lower than for conventional heating systems because it has a long service life and requires little maintenance.
- Investment costs higher than in conventional plants
- Payback period depends on various factors
- Operating costs lower than for conventional plants
- The higher the energy costs, the faster the amortization
- Retrofitting also feasible in existing plants
Conclusion
High-temperature industrial heat pumps are an increasingly important component of sustainable, efficient, and resource-saving industrial production. They demonstrate their strengths in all sectors with high energy requirements, such as the chemical, paper, and food industries. Industrial companies can use this technology to significantly reduce their energy costs and eliminate dependency on fluctuating fossil fuel prices. The technology also reduces CO2 emissions, aids climate protection, and enables viable industrial production in the future.
Checklist for the use of a high-temperature heat pump
- Is a suitable heat source available in the form of waste heat?
- What processes require high-temperature heat and how high is demand?
- What temperature is needed here and what is the required temperature increase?
- Is the power connection adequately dimensioned?
- Is there spatial proximity between heat source and heat sink?
- Do waste heat and heating or cooling demand occur simultaneously?
- Can subsidies be used?
Frequently Asked Questions
Q: What temperature range can a high-temperature industrial heat pump reach?
A high-temperature industrial heat pump such as the VQ180 can generate process heat of up to 200 degrees Celsius, well above the roughly 100-degree limit of conventional industrial heat pumps.
Q: Can a high-temperature heat pump be installed in an existing plant?
Yes. The innovative compressor and process technology is suitable for new manufacturing plants and can also be retrofitted into existing plants.
Q: How much energy can be saved with a high-temperature industrial heat pump?
Compared to conventional heating systems that run on fossil fuels, a high-temperature industrial heat pump consumes up to 70% less energy.
Questions about high-temperature heat pumps? Get in touch
Expert advice is available for questions about high-temperature industrial heat pumps.