
Vilter VQ180 heat pump reduces CO2 at Takeda Vienna by 1,600 tons
The AHEAD project at Takeda’s Vienna, Austria, site has won Austria’s DECA Award for advancing energy efficiency and industrial decarbonization. The Vilter VQ180 high-temperature heat pump, formerly known as ThermBooster™, sits at the center of hte achievement.
What is the DECA award and the AHEAD project?
The award, presented by the Service Provider Energy Efficiency and Contracting Austria association, recognizes Austrian projects that deliver meaningful gains in energy efficiency and decarbonization. Winning initiatives must be technologically pioneering, generate substantial savings and offer broad applicability across industry.
The AHEAD project was led by Takeda, a globally operating pharmaceutical company, in partnership with the Austrian Institute of Technology. SPH, acquired by Copeland in 2026, served as technology partner, contributing the VQ180 heat pump that powers the system.
“We are very proud to be part of this groundbreaking initiative. The award demonstrates that our technology is on the right track for industrial decarbonization,” says Director of Operations Andreas Mück.
How does the VQ180 reduce emissions at Takeda Vienna?
The VQ180 replaces natural gas as a heat source by recovering waste heat from hot water and converting it into saturated steam. At Takeda’s Vienna site, the system produces steam at pressures up to 11 bar(a) and 184°C, matching the levels typically required in pharmaceutical production.
In the AHEAD project, the VQ180 is used specifically for steam generation, allowing Takeda to shift away from fossil fuel combustion for this stage of its process heat demand.
What output does the system deliver?
The VQ180 system at Takeda Vienna delivers:
• Around 1.7 MW of thermal output
• Approximately 2.5 tons of steam per hour
• Up to 1,600 tons of annual CO2 emission reductions
The heat pump operates using natural refrigerants such as butane and water, both of which carry a very low global warming potential. This refrigerant choice supports the long-term durability of the solution as regulatory and environmental standards continue to evolve.
Why does this award matter for industrial carbonization?
The award sends a strong signal that climate-friendly process heat and steam generation are already economically viable. The results from Takeda Vienna demonstrate the scaling potential of high-temperature heat pumps across sectors with similar thermal demands, including paper, chemicals and food production.
This project reinforces the broader case for continued investment in process heat decarbonization. Progress of this kind depends on strong partnerships between technology providers, research institutions and industrial operators committed to shaping a climate-neutral future for process heat.
FAQs
What was Takeda's energy source at the Vienna site before the VQ180 was installed?
Before installing the VQ180, Takeda's Vienna site met its heat demand using natural gas.
Who partnered with Takeda on the AHEAD project?
The AHEAD project was conducted by Takeda together with the Austrian Institute of Technology, with SPH, now part of Vilter, contributing as technology partner.
What refrigerants does the VQ180 use and why does that matter?
The VQ180 operates with natural refrigerants such as butane and water. Both have a very low global warming potential, making the system more future-proof as refrigerant regulations continue to tighten.

